images 2022 10 03T131454.409

Kitchenaid Dishwasher Clean Light Blinking – Causes And Fixing

People frequently take for granted the enormous blessing that is a dishwasher. You won’t understand the value of your dishwasher until it breaks down. In addition to doing dishwashing for you, it can also save you a lot of time. Have issues with your KitchenAid dishwasher? Most problems with blinking and flashing dishwasher lights can be fixed by us.

A KitchenAid dishwasher will flash its lights to alert you to a problem. Many flashing light issues can be easily fixed by restarting the dishwasher after turning the power off for at least a minute. There might be an easy fix if it requires doing more than just switching the dishwasher on and off.

People who are sensitive to dishwashing solutions can also benefit from this device. With the assistance of a dishwasher, they can keep their dishes clean and their hands and skin protected.

A dishwasher should be one of your essential kitchen appliances if you have a hectic lifestyle.

The Popularity of KitchenAid Dishwasher

The betterment of people’s lives has been facilitated by household appliances. Allowing your devices to take care of your duties might save you time. However, it’s crucial to pick the correct retailer when purchasing equipment.

Nowadays, many businesses are making home appliances. However, not every one of these businesses manufactures high-quality equipment. If a machine malfunctions within a week of purchase, there is no use in investing in it.

People are aware that purchasing KitchenAid appliances is a worthwhile investment. Products made by the company have a lengthy shelf life. People now depend on KitchenAid when looking for the ideal appliances.

KitchenAid is a fantastic brand because it has such a wide selection of home appliances to choose from. A few of their most popular devices are air conditioners, refrigerators, freezers, microwaves, and baking ovens. The company’s dishwasher, however, is the most widely used KitchenAid product. It is, without a doubt, among the top dishwashers on the market.

There are no rules; a perfect machine can occasionally make a mistake. These days, a lot of KitchenAid dishwasher owners are having problems. KitchenAid dishwasher clean light blinking is the most prevalent of these issues.

Our article will give you some simple troubleshooting tips and tricks that will assist you in solving the problem if you are also experiencing it.

Causes of a Kitchenaid Dishwasher Clean Light Blinking

Kitchenaid Dishwasher Clean Light Blinking - Causes And Fixing

Blinking/flashing KitchenAid Dishwasher

Usually, a pretty straightforward issue is to blame when the lights on your KitchenAid dishwasher are blinking or flashing. You need to perform a little troubleshooting first; however, the answer can also be straightforward.

See also  Can You Use Dishwasher Pods In Old Dishwashers? Find Out!

The most frequent causes of your KitchenAid dishwasher blinking or flashing are the following. Some specific difficulties may duplicate these, but it’s usually a good place to start.

Cycle Interruption

The lights frequently flash to notify you of an issue when a cycle is interrupted. Sometimes, you only need to shut the door and start the process again to let it run its course.

You must press the start/reset button and shut the door within three seconds if you open the door on purpose to disrupt the cycle. If you don’t finish it promptly, you’ll have to restart the process, and lights can flash.

Finally, you might need to restart the cycle if it appears not to be functioning correctly or if you cannot get the lights to turn out. You must continue the power for this.

If you have easy access to the socket while the dishwasher is plugged in, you can unplug it for one minute. You can cut the power at the breaker panel if the plug is hidden behind the dishwasher or if it is hardwired.

The dishwasher’s little computer can frequently be reset by turning it off for a minute and then turning it back on, resetting everything to zero. Sometimes, you could discover that it is required to be unplugged for a more extended period.

The Setting for Delayed Start

You may have the delay start set, which might occasionally cause your lights to flash. Accidentally pressing the wrong buttons can happen sometimes.

The lights flash until the door is closed when the delay setting is activated. The glow may flash continuously if you add stuff or do not latch the door securely.

Closing the door firmly will reveal whether this is the problem. The lights will stop blinking if the delay setting is active and the switch functions correctly.

You can also disable the delay start or perform a hard reset to test if the issue is resolved.

Failure of the Control Board

Another problem that could result in blinking and flashing lights on the KitchenAid dishwasher is a bad control board. You can unplug and replug the control board with the power ribbon because it is easily accessible.

Just be careful to switch off the dishwasher’s power before dealing with it. Unless you have plans to replace it, many homeowners find it challenging to operate with the control board. You might need to contact a certified KitchenAid technician to help you with this.

See also  How to Use Dishwasher Pods in Older Dishwashers? Answered!

How Can I Fix My KitchenAid Dishwasher Clean Light Blinking Seven Times?

Kitchenaid Dishwasher Clean Light Blinking - Causes And Fixing

Even though equipment sometimes malfunctions, you don’t always need to take them to a repair shop. The problem is typically something that can be resolved quickly and easily at home. Errors can occasionally also be brought on by defects in a machine’s software.

But as soon as you discover the answer, you’ll be able to quickly solve the issue. Therefore, you should try a few remedies at home to see whether they can help or not if the pure light on your dishwasher keeps blinking seven times.

If the problem cannot be fixed at home, you should bring the appliance to the repair facility immediately.

Reset the control board

A machine’s issue can typically be resolved by resetting it. In reality, a straightforward reboot will often work. However, since household appliances cannot be controlled like computers, you might not know how to reboot or reset them.

The KitchenAid dishwasher’s light issue can be resolved by resetting the control board. You can reset the control board by doing the following steps:

  • Once each button has been pressed five times, alternate between pressing the Energy Saver Dry and the Hi-temp scrub buttons.
  • Ten minutes of idle time will allow your dishwasher to reset.
  • It’s also conceivable that the control board was harmed by unknown causes. Therefore, make sure the control board is operating correctly.
  • Press a few of the dishwasher’s buttons to ensure they function correctly before checking the control board’s operations.
  • When some of these buttons stop functioning correctly, the control board is harmed and has to be repaired immediately.
  • Due to this, you should change the control board in your KitchenAid dishwasher. Additionally, you can fix the dishwasher’s control panel. It is not a real solution, as you will continue to run into issues.

Although you can solve many fundamental appliance issues on your own, it is preferable to see a professional replace the control board in your dishwasher. You risk damaging your dishwasher beyond repair if you attempt to complete this job at home.

A Defective Heating Element

Your KitchenAid dishwasher’s clean indicator may be blinking seven times for other reasons, such as a broken heating element. The heating element in the dishwasher’s primary purpose is to heat the water so dishes can be cleaned and rinsed effectively. The water won’t reach the right temperature if the heating element malfunctions.

This will prevent the dishwasher from adequately cleaning the dishes. The dishwasher will alert you of impending danger by blinking the clean light seven times. Verify that the heating element is functioning properly. A multimeter can be used to check whether the heating element inside the dishwasher is broken.

See also  5 Best Dishwasher Detergent For Old Dishwashers

Additionally, make sure there are no burn scars on your dishwasher. If it happens, there isn’t much that can be done to fix the heating element; instead, a new one should be installed. The heating element replacement should only be done by a qualified individual. You can bring your KitchenAid dishwasher to one of the business’s locations for an inspection.

Kitchenaid Dishwasher Clean Light Blinking - Causes And Fixing

If the heating element was accidentally broken and the appliance still has time left on its warranty, you might replace it for free. Purchasing a replacement heating element from the manufacturer is preferable, even if you have to pay for it.

Defective Drain Pump

The clean indicator on your KitchenAid dishwasher may be blinking seven times due to a malfunctioning drain pump. With assistance from an impeller, the drain pump is utilized to force water inside the dishwasher, as its name suggests.

The dishwasher will sound the alarm to alert you to any potential issues if the drain pump is malfunctioning. To ensure that the drain pump is operating correctly, it is crucial to inspect it.

The pump may malfunctioning if water does not drain from your dishwasher after a wash. In this situation, you ought to let a technician examine the pump.

The issue is often brought on by something becoming stuck in the drain pump, and simple cleaning can fix it. You can also examine it at home if something is blocking the drain path.

Run the dishwasher to see if the pump has started operating after cleaning the drain channel. The pump might need to be changed if it malfunctions.

A specialist might be able to repair the drain pump for you if it has been broken. If the pump needs to be replaced, order the original part from the manufacturer; otherwise, your dishwasher’s operation may be impacted.

A home appliance may stop working due to a straightforward problem. However, if your appliance doesn’t have any error codes pre-programmed, you won’t be able to identify the issue right once.

However, some symptoms might point to specific issues. Before calling a technician if an appliance breaks down, try some easy solutions at home.

But it’s crucial not to meddle with any wires or delicate components. You shouldn’t attempt to repair your KitchenAid dishwasher yourself if the issue appears to be serious. Instead, take it to the company’s service facility.

Leave a Reply

Your email address will not be published. Required fields are marked *